• An Image Slideshow
  • An Image Slideshow

Specifications

Inverter Parameters
Inverter Type 16 Bit DSP PWM Controlled
Switching Frequency 16KHz
Output Power Factor 0.8
Input Power Factor Unity
Output Regulation ±1%
Output Frequency 50Hz ± 0.1Hz
Efficiency 93%
Wave Form Pure Sine Wave
Overall Parameters
Bypass Static / Manual
Control System Single Card Controlled
Parameter Monitor LCD 16—2 / Graphic (optional)
Communication Ethernet with web based data logging (Optional)
Input Parameters
Input Supply Single Phase
Voltage 140V- 290V AC
Frequency 50 Hz ± 10% Hz
Output Parameters
Voltage 230 V± 1%
Frequency 50Hz ± 0.5 Hz
Crest Factor 3:1
Harmonic Distortion <2%
Output Wave Form Pure sine wave
Over Load Handling Capacity 120% for 8 Mints
150% for 15 sec
300% for 1 sec
Battery Parameters
Battery Voltage 72 - 360 VDC
Battery Type Lead Acid / SMF
Number of Battery As per rating
Battery Capacity 45AH - 200AH
Protection
Input High / Low
Input Over current
DC Bus High / Low
Battery Deep Discharge
Battery Over Charge
Over Temperature
Output Short Circuit
Return Voltage
Over Load
Environmental Parameters
Operating Temperature 0-45°
Acoustic Noise at 1mtr <45 db
Relative Humidity Max 95% non condensing
LCD Display Parameters
Mains Condition
Charging Current
Output Voltage
Output Frequency
Battery Status
Load status
Low Battery Alarm
Over Load Alarm
Low Battery Trip
Over Load Trip
Short Circuit Trip
Over Temperature Trip
Battery Terminal Open
Settable Parameters on Front Panel
Output Voltage
Charging Current
Over load Set Point
Charger Parameters
Charger Type IGBT Based PWM Controlled Rectifier
Charger Switching Frequency 20KHz
Charging Current 3Amp “ 15A Amp(Settable)


The design and manufacture of our products are subject to constant improvement. Hence the above specification of the supplied product may slightly vary without information.

Applications

In Offices, hospitals, malls, clinic, servers, ATMs and other commercial places.